TROTEC

Trotec is a pioneer when it comes to measurement technology and air conditioning devices.

With state-of-the-art products for indoor climate monitoring, laser distance meters and air treatment, Trotec sets standards in precision and user-friendliness.

Trust Trotec when it comes to accurate measurements and optimal indoor air.

118 products


  • Trotec Entkalker 1000ml - eShoppen GmbH Trotec Entkalker 1000ml - eShoppen GmbH

    Trotec Trotec descaler 1000ml

    Environmentally friendly The Trotec liquid descaler consists of organic acids that are 100% biodegradable. Active ingredient indicator The striking pink color of the descaler is used to check the active ingredient. As soon as the color fades and starts to turn yellow, the liquid loses its descaling power.   Energy saving Limescale causes electronic devices to require up to 30% more electricity to achieve the same performance as a device without limescale. So clean your devices regularly to save energy. The Trotec liquid descaler can help you with this!   Quality product The 100% biodegradable liquid descaler from Trotec is a quality product 'Made in Germany'. It is made on an amidosulfonic acid basis and contains maleic acid to prevent re-calcification. Universal descaler for household appliances The descaler with color indicator is not only suitable for cleaning the coffee machine/fully automatic coffee machine, but also for all other household appliances with a water tank, such as air conditioners, humidifiers, kettles or steam irons. Data Quality product, made in Germany Natural and environmentally friendly - 100% biodegradable Content: 1000 ml Safety lock/child lock Universally applicable: coffee machine, fully automatic coffee machine, espresso machine, air conditioners, humidifiers and much more. Suitable for devices from all electrical appliance manufacturers Mixing ratio: 0.5 litres of descaler for a 30 litre humidifier water tank. For further information please refer to the descaling instructions provided by your appliance manufacturer.

    CHF 11.50

  • Trotec BY10 Reifendruckprüfer - eShoppen GmbH

    Trotec Trotec BY10 tire pressure gauge

    Digital measuring device for quick and precise tire pressure control Optimize cash value and save money: According to recent studies, almost one in three drivers drives with tire pressure that is too low. What many people don't realize is that even if the tire pressure is 0.5 bar lower than the manufacturer's recommendation, fuel consumption can increase by up to 6%! In addition, there is increased tire wear and additional safety risks such as longer braking distances or unstable cornering. Regular tire pressure measurements are therefore worthwhile in every respect! Since this tire pressure gauge fits all Schrader valves, which are not only used on car tires, but also on motorcycles, mountain bikes, and many children's bikes, it is a versatile tool for every household or business. With standard adapters, the BY10 can also be used for many other tire valve types. Practical equipment detail Thanks to the integrated flashlight, you can quickly and easily see the valve position or visually check the tire profile and condition, even in the evenings and during the dark season. Our tip: Do not rely on tire pressure gauges at gas stations, which are often in poor condition or difficult to reach and sometimes even missing altogether. With the BY10 you can easily and reliably determine the exact tire pressure with digital precision at any time and read it exactly on the LCD display. Advantages for practice: Digital measuring device for quick and precise tire pressure control Easy reading of measured values ​​thanks to large LCD display Suitable for all valves Integrated flashlight Optimal price-performance ratio Automatic switch-off Measuring range: 0.35 to 6.9 bar, 5 to 100 PSI, 35 to 690 kPa Accuracy: ± 1 % Functions: Unit selector for Bar, PSI or kPa, integrated flashlight, automatic switch-off Power supply: 2 x 1.5 V, IEC LR03 Dimensions: 156 x 42 x 20 mm Weight: 200g Scope of delivery: Measuring device operation manual

    CHF 12.00

  • UV Schutzbrille - eShoppen GmbH UV Schutzbrille - eShoppen GmbH

    Trotec UV protective glasses

    Universally applicable safety glasses. They protect against UV rays during non-destructive leak detection using tracer detection. They are also perfect for use in the processing industry. They protect against special risks such as abrasion, air particles, biohazards, etc. EC Category PPE Category II, EN 166/169; European Directive 89/686/EEC, optical class 1, F - low energy impact (45 m/s): The glasses meet the EN166/169 standard, which requires 100% UV protection against rays with a wavelength of 380 to 400 nanometers. The standard is set by the European Union for safety glasses and is an important quality feature for UV protection glasses. Characteristics • Made of polycarbonate for high break resistance and effective UV protection • Clear, color-neutral tint that offers good protection against glare • Scratch-resistant, also ideal as over-glasses Best protection against UV radiation When working with UV light, you must always wear glasses to protect your eyes from harmful UV radiation. For example, when using UVA hand lamps, UV-TrackMaster or UV-Torchlight 15F leak detectors. Otherwise, harmful effects such as corneal inflammation, cataracts or retinal inflammation can occur. Technical data EN166/169 standard: fulfilled UV protection: 100% Tint: clear, color-neutral Material: Polycarbonat Application: Industry, Outdoor Trotec Article No. 3.510.011.100

    CHF 12.90

  • Trotec BT20 Einstechthermometer - eShoppen GmbH

    Trotec Trotec BT20 penetration thermometer

    The BT20 from the MultiMeasure Basic series is a practical penetration thermometer that, thanks to its large measuring range from -40 °C to +250 °C, can be used for a wide variety of measuring tasks in gastronomy, trade, crafts, industry, as well as in laboratories and in the hobby sector. The contact thermometer has a thin and long stainless steel measuring tip that enables core temperature measurements quickly and reliably with a short response time of only 2 seconds. The hygienically easy-to-clean and food-safe plastic housing is also provided with a rubberized soft-touch protective cover, which ensures a firm grip and additional splash protection in every situation. The BT20 offers food processors, service professionals and food inspectors in particular a simple and effective method for determining the core temperature of food in accordance with HACCP. But the BT20 is also ideal as a roasting thermometer for the professional or private chef. Here are some practical advantages at a glance: quick and easy core temperature measurements wide measuring range from -40 °C to +250 °C Minimum value, maximum value and hold function easy handling and cleaning fast response time rubberized soft-touch protective cover food-safe plastic housing Stainless steel measuring tip optimal price-performance ratio

    CHF 17.00

  • Trotec BE16 Spannungsdetektor - eShoppen GmbH Trotec BE16 Spannungsdetektor - eShoppen GmbH

    Trotec Trotec BE16 voltage detector

    This easy-to-use hand-held measuring device is part of the basic equipment of every DIY enthusiast and craftsman. This practical quick measuring device reliably detects voltage sources from just 5 volts up to 1000 volts or from 50 Hz to 400 Hz. The sensitivity can be continuously adjusted using the rotary control on the side of the voltage detector. This allows you to finely pre-adjust the measuring range to the expected voltage. It is ideal if, for example, you want to find a broken cable or to determine the presence of alternating voltage in fuses, open wires, cable reels, junction boxes, sockets, switches and hidden wall cables. Fast and reliable voltage testing – even in dark places Due to the capacitive measuring method, it is enough to bring the voltage detector close to the conductor - the detector warns you quickly and without contact using a red flashing LED in the entire detector tip. An acoustic warning signal also sounds. The compact pen-shaped voltage detector is equipped with a switchable LED light integrated in the measuring head, which enables you to work safely and accurately even in poor lighting conditions. Whether attached with a clip in your shirt, jacket or trouser pocket – with the handy detector you always have a reliable testing device for quick voltage detection at hand. Advantages at a glance • Fast and contactless detection of alternating voltage • Voltage range 5 V – 1000 V AC / 50 Hz – 400 Hz • Protection class CAT IV 1000 V • Optical and acoustic alarm when voltage is applied • Continuous adjustment of the measuring sensitivity • Compact pen-shaped design with pocket clip • Integrated LED light for working even under unfavourable lighting conditions • Optimal price-performance ratio scope of delivery • Measuring device • Batteries • Operation manual Technical data Measuring circuit category CAT-IV (1000V) Measuring range V/AC 5 a 1000 V Vicinity Pollution level 2 Protection class IP20 Voltage display LED Features • contactless detection of alternating voltage (without galvanic contact) • acoustic alarm • optical alarm • integrated light display Humidity range max. 85% RH Temperature range 0 °C to 40 °C Security EN61610-1:2010, EN61610-2-033:2012 EN61326-1:2013, EN61326-2-2:2013 Battery type 2 x 1.5V, AAA Dimensions (L x W x H) 154 x 32 x 28 mm Weight 50g Trotec article no. 3,510,205,217 guarantee 2 years

    CHF 18.90

  • Trotec 5F UV-Torchlight - eShoppen GmbH Trotec 5F UV-Torchlight - eShoppen GmbH

    Trotec Trotec 15F UV torchlight

    Universally usable LED flashlight with ultraviolet light for leisure or work. The light spectrum of 380 to 385 nanometers is exactly the right UV radiation range for many common applications. For example, you can easily check security features on identification documents and banknotes, examine works of art for abnormalities under UV light, or carry out hygiene inspections and checks on cleaning staff. Of course, the lamp is also ideal for geocaching at night and for hygiene checks in the kitchen, bathroom or hotel room, because its nine ultraviolet high-performance LEDs not only make UV dyes visible, but also traces of dried blood, sweat or other liquids. Pet owners can easily check their animals for house training. In addition, leaks in liquid-carrying lines can be found using fluorescent fluid additives, for example in the automotive and domestic installation sector or in the location of roof leaks. Thanks to a length of less than 10 cm, the UV lamp can also be carried in a trouser pocket and can be conveniently switched on and off using the practical end cap switch. There are countless types of UV lamps - and many of them are also similar in appearance, which often makes comparison even more difficult. So pay attention to the quality of workmanship and the right wavelength for your application needs. In the UV range, 380 nanometers define the limit to visible light. Lamps with 390 to 410 nm therefore still have a very high proportion of visible light and only relatively little UV light. Technical data Power supply 3 x AAA batteries (not included) Operating voltage 4.5V Housing Aluminium 6061-T6, black Lamps 9 high-performance LEDs of 1 W each consumption 9W spectrum 380 - 385 nm Dimensions (H x W x L) 29x29x98.5mm Weight 100 g guarantee 2 years

    CHF 19.00

  • Trotec Dreibein Universalstativ - eShoppen GmbH Trotec Dreibein Universalstativ - eShoppen GmbH

    Trotec Trotec tripod universal stand

    This universal device tripod has a stable center brace with locking mechanism for secure positioning and is already supplied with a robust 3-way head including quick-release plate with a standard 1/4" connection for optimal alignment of the measuring device or camera. The head can be folded to the side by up to 90 degrees, so that it can be used in portrait or on sloping surfaces. Non-slip and flexible rubber feet help the user to adjust to different floor conditions. A quick-release clamp ensures quick and uncomplicated assembly. The panoramic ball head makes almost any setting possible when it comes to steady camera positioning or precise measurements. By extending the telescopic rods, you can reach a comfortable working height of up to 150 cm. If necessary, the quick-release plate can be released with one hand when the situation requires it. Trotec Article No. 6.300.000.200

    CHF 19.50

  • Trotec Energiekosten-Messgerät BX09 - eShoppen GmbH Trotec Energiekosten-Messgerät BX09 - eShoppen GmbH

    Trotec Trotec energy cost measuring device BX09

    Swiss version, suitable for three-pin 230V household sockets. Quick and easy measurement of energy consumption Which electrical appliance in the office or household consumes how much energy? With a minimum possible power display of 0.1 W, this measuring device can detect even the smallest energy wasters. This also makes it possible to detect standby consumption in devices, i.e. any consumption when the device is switched off. It is extremely simple to use: plug the measuring device into the socket and connect the power consumer to be checked. You can immediately see its current energy consumption, either as active power in watts, kWh, price or cost per kWh. Use this measuring device to test your electrical devices, such as TV and HiFi systems, LCD TVs, amplifiers, DVD players, video recorders, computers, servers, refrigerators, freezers, washing machines, dryers, air conditioners, heaters, ceiling floodlights, floor lamps, background and shop window lighting, machines, and much more. Advantages at a glance Quick and easy measurement of energy requirements Power consumption display in watts, kWh or costs Optimal price-performance ratio Minimum possible current display 0.1 W Buffer capacitor for storing the selected settings Display of standby consumption from 0.1 W - this is not possible with many competing products Display of the current power consumption of one or more devices Display of the costs of energy consumed within a certain period of time (electricity price must be recorded once) Connection of a multiple socket with several devices possible Easy-to-read and easy-to-understand LCD display Power failure protected Swiss version - no conversion or adapter required   Technical data Measuring range Total electricity consumption current consumption 0.1 - 9999 kWh 0.1 - 2300 watts (max. 10A) accuracy ± 2% Voltage frequency 230V / 50-60 Hz (= household socket) Advertisement LCD Storage yes, recording capacity 9999.9 hours Measuring circuit category CAT II (2500V) Conformity / Safety EN 61010-1, EN 61326-1, pollution degree 2 Protection class IP20 Ambient temperature 5 - 40 °C Ambient humidity max. 85% RH Dimensions (H x W x D) 95x51x70mm Weight 100 g Trotec article no. 3510205916 guarantee 2 years

    CHF 19.90

  • Trotec Standfüsse zu Heizplatten TIH-S 300 - 450 S (2er Pack), Alu - eShoppen GmbH Trotec Standfüsse zu Heizplatten TIH-S 300 - 450 S (2er Pack), Alu - eShoppen GmbH

    Trotec Trotec feet for heating plates TIH-S 300 - 450 S (pack of 2), aluminum

    These easy-to-install aluminum feet fit the smaller heating plates of the TIH-S series (300S/400S). The aluminum feet are designed so that when the heater is installed along a wall, it maintains the optimal distance from the wall to ensure air circulation and the efficiency of the panel. Which models do these feet fit? The frame of the heating plates is the same thickness on all TIH-S models. As such, these feet fit all sizes. However, for better stability, we recommend the slightly larger, black feet for TIH500S and higher. Product details Material: anodized aluminum Can be used in any room Easy construction Maintenance-free Can be used for the heating plates TIH 300 S and TIH 400 S Scope of delivery: 1 pair (=2 pieces) Trotec article no.1.410.003.001

    CHF 19.90

  • Steckdosen-Heizlüfter TFC 1 E - eShoppen GmbH Steckdosen-Heizlüfter TFC 1 E - eShoppen GmbH

    Trotec Socket fan heater TFC 1 E

    The "TFC" is the simple solution for quick heat at home or on the go. Small and handy, it fits in any bag or luggage. It is plugged directly into the socket without a cable and produces an amazing heat output after just a few seconds thanks to the 500W ceramic element. The design is attractive and is therefore suitable for use in the living room or bedroom, and of course also for temporarily heating the bathroom, hobby room or workshop. The ventilation can be set to two levels: strong/weak. The operating noise is quieter on the weak level, but can be described as quite quiet even on the strong level. The small fan level is for normal operation, the second is used as a quick heater to quickly distribute the warm air throughout the room. The effective mini heaters can generate heat wherever you need it within minutes - without having to heat the entire house or apartment. Easy handling Operating the plug-in fan heater is extremely simple: plug it in, switch it on and use the thermostat on the LED display to select a desired temperature between 15 and 30 °C. Done. You can also use the timer to heat a room at a precise time up to 12 hours in the future. Perfect for preheating the bathroom in the morning, for example. The model is also equipped with an energy-efficient automatic switch-off when the target value is reached. Emission-free heat The heated air always remains pleasantly clean because PTC ceramic heating elements generate heat that is emission-free. In contrast to conventional fan heaters with heating wires, no dust particles or even animal hair are burned on the ceramic heating element. This protects the sensitive airways of allergy sufferers as well as those of small children and sensitive people. Safety is included with plug-in fan heaters The heating plug is absolutely reliably protected against overheating. The fireproof ceramic elements have an extremely long service life and, in addition, the burning out of heating wires is ruled out by design in all ceramic heaters. The fan run-on function with countdown automatically cools down the heating element of the mini fan heater 60 seconds after the heater is switched off, so that it is safe to unplug from the socket. Faster air heating – more pleasant climate Trotec fan heaters with PTC ceramic heating elements are characterized by faster heating behavior compared to conventional heating coil technology. Ceramic heaters also keep the room temperature more even, which creates a more pleasant living environment. Advantages for practice: Fast and pleasant warmth Quiet and compact economical PTC heating element Suitable for rooms up to 10 m² / 25 m³ Automatic switch-off when the set temperature is reached Fan run-on function with countdown 2 ventilation levels Temperature control from 15 °C to 30 °C Timer function (1-12 hours) LED display Overheating protection Suitable for allergy sufferers Energy efficient scope of delivery The scope of delivery includes the original heater including a suitable adapter that fits all normal three-pin Swiss household sockets (type T13). Comparable devices: Eurom Heat Plug In - Ultraheat Pro - Valty Heater

    CHF 29.00

  • Trotec AirLock 200 Fensterabdichtung - eShoppen GmbH Trotec AirLock 200 Fensterabdichtung - eShoppen GmbH

    Trotec Trotec AirLock 200 window sealing

    Ideal for removing the moist warm air from 2-hose air conditioning systems. In 99% of cases, the exhaust hoses are mounted on an open window. Without an intelligent window duct, such a solution is extremely uneconomical, as warm outside air constantly flows back inside through the window opening, at least partially destroying the cooling performance of the air conditioning unit. In other words: your mobile air conditioning unit not only has to cool the warm room air, but also the outside air flowing in. This clever sealing cloth significantly increases energy efficiency. This practical helper can be attached to any type of window in just a few easy steps and not only reliably prevents warm outside air from flowing back into the air-conditioned interior, but also prevents insects from entering. If installed correctly, the window can be closed as usual without having to remove the cloth. The translucent material is made of a durable and water-repellent material with low thermal conductivity. This increases cooling efficiency and reduces consumption costs. The purchase costs are therefore paid for in a very short time. Easy construction The sealing cloth is attached using the Velcro fastener provided, which can be removed at any time, similar to mosquito nets. It can also be easily cleaned in the washing machine. Suitable for air conditioning units with two-hose technology Air conditioning units with two-hose technology work with two separate air paths. Commercially available window seals normally only have one zipper opening and are therefore not suitable for use with two-hose units. This "Airlock" has two openings, which allow the variable attachment of one or two exhaust hoses. If only one opening is required, the zipper closes the second invisibly and airtight. Maximum circulation 400 cm The sum of the three open sides for this model must not exceed 400 cm. If you need a longer fabric, please also consider the "Airlock1000" model. Advantages at a glance • Increases cooling performance, reduces energy consumption • Suitable for casement windows, tilt windows and roof windows (must be able to be opened on one side, do not rotate over the axis) • For air conditioning units with single-hose and two-hose technology • Prevents the penetration of warm air and insects • The window can be closed despite the window seal • Pays for itself in a very short time • Easy self-assembly Trotec Article No. 6.100.002.002

    CHF 29.00

  • Trotec BM20 Feuchtemessgerät - eShoppen GmbH

    Trotec Trotec BM20 moisture meter

    Moisture indicator BM20 for measuring moisture in wood and soft materials The BM20 moisture indicator from the MultiMeasure Basic series is a semi-professional measuring device for quickly determining the moisture content of building materials or wood using the resistance method. The easily replaceable steel measuring pins enable a solid connection with the test material and ensure reliable measurement results when measuring the moisture content of sawn wood and firewood. A bar scale and the additional direct value display of the moisture volume in absolute percentages make it easier to read the moisture values; two different scale ranges for wood and building materials increase the accuracy. For wood moisture measurement, a calibration curve is stored in the device, which corresponds to the average of the wood types relevant in Europe based on a wood temperature of 20 °C. Therefore, no further settings are necessary for a quick indication of the wood moisture content. Switching from wood moisture mode to building moisture mode and back is done using a convenient mode selector slider. A reference adapter is integrated into the protective cap of the device to check the battery status and function. Technical data: Measuring principle: resistance method Electrode length: approx. 8 mm Wood moisture measuring range: 1 - 45 % Wood moisture accuracy: approx. ± 1 % Measuring range building moisture: approx. 0.2 - 2.4 % Accuracy of building moisture: approx. ± 0.05 % Permissible ambient conditions: 0 - 40 °C / 0 - 85 % RH Power supply: 3 x Cr 2032 Dimensions L x W x H (in mm): 139 x 47 x 25 Weight: 100g Warranty 2 years

    CHF 29.00

  • Trotec BD11 Laser-Entfernungsmesser - eShoppen GmbH Trotec BD11 Laser-Entfernungsmesser - eShoppen GmbH

    Trotec Trotec BD11 laser distance meter

    This practical mini laser has everything a distance meter needs. This includes precise laser measurement of distances, areas and volumes. Surprisingly diverse features with helpful functions and simple and intuitive operation. It is very small and light and fits in any pocket. Excellent price-performance ratio Despite its very low price, the measuring device impresses with its quality and functionality. Distances of up to 30 meters, areas and volumes are measured quickly but also precisely. The deviation is a maximum of 3 millimeters. The device also scores points with the 'single' and 'double' Pythagoras: Both are indispensable functions that allow, for example, the indirect calculation of distance or height in addition to checking a right angle. The handheld laser meter also has other useful functions such as a continuous measurement mode, the addition and subtraction of measurement results and the automatic storage of the last 10 measurements. Well thought-out equipment Both the simple operating instructions and the practice-optimized features of the handheld laser meter make this small measuring device very powerful. • Automatic switch-off for the laser after 30 seconds • Automatic switch-off for the entire measuring instrument after 3 minutes • Encased in a robust, dust and splash-proof housing • Protection class IP54 The integrated lithium-ion battery can be charged quickly and easily using the micro USB cable included in delivery. Advantages at a glance • 0.05 m to 30 m range • Indirect distance and height or partial height calculation (3-point Pythagoras functions) • Precise, instant measurement of distances, areas and volumes • Backlit multi-line display • Continuous measurement mode with min/max function • Addition and subtraction of measurement results • Automatic storage of the last 10 measured values • Robust workmanship – dust and splash-proof (IP54) • Measure from the front and rear edges • Battery status indicator • Automatic switch-off • Hand strap • 3.7 V (200 mAh) lithium-ion battery, rechargeable via micro USB cable scope of delivery • Measuring device • Li-Ion battery (integrated) • Hand strap • Micro USB cable • Operation manual Technical data Measuring range distance resolution accuracy 0.05 - 30 m (= 0.17 - 98 ft) 1 mm ±3mm Laser point at a distance of 10 m at a distance of 20 m at a distance of 30 m 10mm 12mm 20mm Laser class 2 Laser power < 1 mW (620 - 690 nm) Storage Retrieve last 10 measurements power supply Li-Ion battery 3.7 V (integrated) 200mAh, 2000 measurements per battery charge Protection class IP54 Dimensions (H x W x D) 75x34x15mm Weight 24g Ambient temperature operation / storage 0 - 40 °C / -20 - 70 °C Trotec article no. 3,510,205,153 guarantee 2 years

    CHF 34.00

  • Trotec Schallpegel-Messgerät BS06 - eShoppen GmbH Trotec Schallpegel-Messgerät BS06 - eShoppen GmbH

    Trotec Trotec sound level meter BS06

    A handy, inexpensive device for quick and reliable measurements of a wide range of noise sources within a measuring range of 40 to 130 dB(A). Minimum and maximum values ​​can also be displayed. For use in windy outdoor environments, an attachable wind shield is also included in the scope of delivery, which suppresses annoying wind noise. This means that the measured values ​​are not affected. An integrated sensor constantly monitors the ambient light and automatically switches on the display lighting in poor lighting conditions. Wide range of applications Thanks to the successful combination of innovative features, ergonomic design and affordable price, this precision instrument is suitable for a wide range of applications. For example, for measuring noise and sound in the office, during leisure time, during machine inspections, in private living environments, on construction sites, traffic noise, maintaining the volume of music and much more. It can also be used for quality control in the construction industry, for example to detect sources of noise or weak insulation. The disturbing noises are often transmitted through the ventilation system or other supply shafts. Advantages at a glance Measures sound quickly and reliably Optimal price-performance ratio Minimum value, maximum value and hold function Sensor-controlled display lighting in poor lighting conditions Simple one-handed operation Very short response time Tripod thread Practice-optimized German industrial design - protected design scope of delivery • Measuring device • Battery • Wind protection • Operation manual Technical data Sensor technology Sound dB(A) Measuring range sound 40 - 130 dB(A) accuracy ±3.5 dB(A) (at 1 kHz and 94 dB(A)) resolution 0.1dB(A) response time 0.125 seconds Frequency range 31.5Hz - 8kHz Power supply 9V block battery Operating time > 30 hrs. Weight 135g Dimensions (H x W x D) 132x56x33mm Vicinity: temperature humidity 0 - 40 °C 10 - 75 % RH (non-condensing) Trotec article no. 3,510,205,051 guarantee 2 years

    CHF 34.00

  • Trotec AirLock 1000 Fensterabdichtung - eShoppen GmbH Trotec AirLock 1000 Fensterabdichtung - eShoppen GmbH

    Trotec Trotec AirLock 1000 window sealing

    Ideal for removing the moist warm air from 2-hose air conditioning systems. In 99% of cases, the exhaust hoses are mounted on an open window. Without an intelligent window duct, such a solution is extremely uneconomical, as warm outside air constantly flows back inside through the window opening, at least partially destroying the cooling performance of the air conditioning unit. In other words: your mobile air conditioning unit not only has to cool the warm room air, but also the outside air flowing in. This clever sealing cloth significantly increases energy efficiency. This practical helper can be attached to any type of window in just a few easy steps and not only reliably prevents warm outside air from flowing back into the air-conditioned interior, but also prevents insects from entering. If installed correctly, the window can be closed as usual without having to remove the cloth. The translucent material is made of a durable and water-repellent material with low thermal conductivity. This increases cooling efficiency and reduces consumption costs. The purchase costs are therefore paid for in a very short time. Easy construction The sealing cloth is attached using the Velcro fastener provided, which can be removed at any time, similar to mosquito nets. It can also be easily cleaned in the washing machine. Suitable for air conditioning units with two-hose technology Air conditioning units with two-hose technology work with two separate air paths. Commercially available window seals normally only have one zipper opening and are therefore not suitable for use with two-hose units. This "Airlock" has two openings, which allow the variable attachment of one or two exhaust hoses. If only one opening is required, the zipper closes the second invisibly and airtight. Maximum circumference 560 cm The sum of the three open sides for this model must not exceed 560 cm. This is usually enough to enclose even tilted balcony doors. For normal-sized windows, please also consider the "Airlock200" model. Advantages at a glance • Increases cooling performance, reduces energy consumption • Suitable for large casement windows, large tilt windows and tilted balcony doors • For air conditioning units with single-hose and two-hose technology • Prevents the penetration of warm air and insects • The window can be closed despite the window seal • Pays for itself in a very short time • Easy self-assembly Trotec Article No. 6.100.002.004

    CHF 35.00

  • Trotec BF06 Luxmeter (Lichtmessgerät) - eShoppen GmbH Trotec BF06 Luxmeter (Lichtmessgerät) - eShoppen GmbH

    Trotec Trotec BF06 luxmeter (light measuring device)

    Accurate light measurement at an affordable price: This compact mini lux meter enables precise light intensity measurements indoors and outdoors. The detector meets the requirements of the ISO-recognized international lighting commissions (CIE) - the integrated spectral filter reliably filters out infrared components so that only the relevant light spectrum is recorded. The successful combination of reliable measuring technology, ergonomic design and unbeatable price-performance ratio makes this device a universal light meter for a wide range of applications. Application examples • Light intensity measurement at work or at home • as an aid in window display design, in trade fair construction or for optimal film and photo set lighting • Light incidence measurements for plantings in green spaces, conservatories or your own garden • As a useful planning tool for architects or for performance control of indoor and outdoor lighting systems Advantages at a glance • Measurement of illuminance and light incidence • Switching function lx/fc • Optimal price-performance ratio • Large, easy-to-read measurement display • Maximum value function • Simple one-handed operation • Sensor-controlled display lighting in poor lighting conditions • Automatic switch-off • Tripod thread 1/4 inch scope of delivery • Measuring device • Battery • Operation manual Technical data Measuring range 0 lx to 40,000 lx (0 fc to 3716 fc) accuracy ±5 % ±10 lx/fc (< 10000 lx / 1000 fc) ±10 % ±10 lx/fc (> 10000 lx / 1000 fc) resolution 0.1 lx / 0.01 fc Measurement rate 2.5 times per second, nominal Display LCD, monochrome Ambient temperature Operation 0° to +40 °C Storage -10° to +60 °C Ambient humidity max. 80% RH (non-condensing) Dimensions (L x W x H) 157 x 34 x 56 mm Weight 138g Trotec article no. 3,510,205,081 guarantee 2 years

    CHF 35.00

  • Trotec HyStream 2100 Heissluftgebläse - eShoppen GmbH Trotec HyStream 2100 Heissluftgebläse - eShoppen GmbH

    Trotec Trotec HyStream 2100 hot air blower

    With a power consumption of 2000 watts and flexible adjustment of hot air temperature and blower power, this hot air blower enables you to use it for a wide range of applications, from soldering, welding and tinning work to adhesive curing and paint removal, as well as film shrinking and paint drying. Versatile configurable for a wide range of applications To ensure that the heat is always controlled during use, the device has many convenient setting options. The hot air temperature can be preselected at the touch of a button between 50 °C and 650 °C in 10-degree increments. The air volume can also be regulated in 5 stages between 250 and 500 liters per minute. In this way, you can optimally configure the "Hystream" for every application. The color LCD on the back is particularly practical. Not only does the display give you a clear view of the current working values ​​for temperature and air volume, a color change also informs you when the preselected temperature value has been reached. Green signals the heating phase, red confirms that the target temperature has been reached - it's that simple. It is just as easy to handle: the low weight of just 800 g makes it particularly pleasant to use for longer periods of time, and the ergonomic design of this hot air tool ensures comfortable working and a secure grip thanks to the pistol grip with soft grip and protective guard. Practical functions for more comfort and safety The hot air blower is electronically controlled and thus ensures a constant working temperature even during continuous operation - a must for particularly precise soldering and welding work. In addition, an overheating protection is integrated, which automatically switches off the heating element in the event of an overload, while the blower remains in operation. In addition to the 60 hot air settings for high temperatures up to 650 °C, the "Hystream" also has a cold setting of 50 °C for rapid cooling of the material to be processed or for changing the attachment nozzle. The cold setting also allows the heating coil to be cooled down quickly and in a particularly gentle manner before the device is stowed away again after use. Thanks to the specially balanced weight distribution, this thermal tool can also be used without any problems in a stationary, tilt-proof position for hands-free work. This means you can hold the workpiece with both hands, which is particularly practical when bending pipes. But the stand-alone operation is also an advantageous solution for longer soldering work and many other stationary applications. All-rounder at professional level – special applications included The nozzle set included in the standard delivery makes this hot air blower the optimal thermal tool for practically every task: • A deflection nozzle protects heat-sensitive substrate materials from overheating by deflecting the heat beam. Ideal for removing old paint and putty from window frames or for restoration work. • With the grill lighter nozzle, the charcoal is glowing and ready for grilling in just a few minutes. • The reducing nozzle focuses the heat beam for more precise work, for example for removing paint in corners or for welding. • And a wide-jet nozzle ensures a constant, even distribution of air, ideal for removing old paint over large areas or for evenly drying filler work. When not in use, the hanging loop integrated in the cable offers you a helpful hanging option for quick access. Advantages at a glance 2000 watt hot air blower Ergonomic pistol design with soft grip and protective guard Large, easy-to-read LCD display of the selected performance values Display color changes when the desired temperature is reached Air volume adjustable in 5 stages between 250 and 500 liters per minute Temperature control from 50 °C to 650 °C in 10 degree increments Safe operation through overheating protection Hanging loop on the cable for storage Thanks to balanced weight distribution, it is tilt-proof when standing and can be used for hands-free work Nozzle set for many special applications already included in delivery Cold setting for rapid temperature reduction Fatigue-free working thanks to the low weight Technical data Mains connection 230V / 50Hz Cable / Connector approx. 2 m, EU plug with Swiss fixed adapter Air volume flow 250 - 500 litres/hour Fan speeds 5 Blow-out temperature 650 °C Weight 800g Dimensions (W x H x D) 270x210x60mm Regulation temperature in 10 °C increments Trotec article no. 4,435,000,020 guarantee 2 years

    CHF 35.00

  • Trotec Standfüsse zu TIH-S 500 - 1100, 2er Set, schwarz - eShoppen GmbH Trotec Standfüsse zu TIH-S 500 - 1100, 2er Set, schwarz - eShoppen GmbH

    Trotec Trotec feet for TIH-S 500 - 1100, set of 2, black

    We recommend these stable feet for professional installation of the infrared panels of the TIH-S series. They guarantee a robust stand, especially for the wider models from TIH500S to TIH1100S. They are inserted into the side of the panels and fixed on both sides with four screws each. The feet are designed in such a way that when the heater is installed along a wall, it maintains the optimal distance from the wall to ensure air circulation and the efficiency of the panel. Product details Material: anodized aluminum, black powder coated Can be used in any room Easy construction Maintenance-free Can be used for all heating plates TIH-S series Scope of delivery: 1 pair (=2 pieces) Trotec article no.1.410.003.099

    CHF 37.90

  • Trotec BD8M Laser-Distanzmessgerät - eShoppen GmbH Trotec BD8M Laser-Distanzmessgerät - eShoppen GmbH

    Trotec Trotec BD8M laser distance meter

    This compact multifunctional measuring device combines the functionality of three useful measuring tools (laser distance meter, cross line laser, tape measure) and is therefore recommended for every pocket of both ambitious DIY enthusiasts and commercial users (e.g. architects, engineers, interior designers, craftsmen). Uncomplicated distance, area and circumference measurements As a classic laser distance measuring device, the device easily measures distances of up to 40 m, areas and volumes indoors. For maximum economical use of materials during renovation work, the precise calculation of floor, ceiling or wall areas is one of the easiest tasks for the laser distance meter. A Pythagoras function is also integrated to carry out indirect laser measurements (e.g. height measurements of walls or furniture). Cross line laser and tape measure included An integrated cross line laser projects bright laser lines onto surfaces when required, for example to optimally align drill holes, pictures, tiles, wallpaper strips, wall cabinets or shelves. An integrated tape measure (5 m) with a practical return button is ideal for manual measurements in hard-to-reach places. The outstanding features of the measuring device, which weighs just 295 g, are completed by a practical wrist strap and a belt clip integrated into the device housing. Multifunctional professional measuring technology at a DIY price Thanks to its high measuring range of 40 m (laser measurement) and the integrated 5-meter tape measure, the 3-in-1 multifunctional measuring device is recommended for almost all surveying work at home, for hobbies and for crafts. Designed for rough construction site use Thanks to its robust housing, the device can withstand even adverse conditions on the construction site. A secure grip in all measuring positions and additional fall protection are provided by a surrounding rubber coating in the form of non-slip soft-grip inserts. Clear view of precise measurement results The data determined via laser measurement are clearly visible on the backlit multi-line display and are also saved in the internal data memory (max. 20 measurements). Addition and subtraction of the measurement data is possible, as are continuous measurements with MIN/MAX function (setting function). Thinks for yourself and switches off automatically when not in use To ensure maximum operating time, the measuring device has an intelligent automatic switch-off function that automatically switches off the laser after 30 seconds and the entire device after 2 minutes if not in use. This intelligent power-saving function is particularly useful in hectic everyday life on a construction site. The batteries required for operation (2 x 1.5 V AAA batteries) are already included in the scope of delivery. Advantages at a glance • 0.05 m to 40 m laser distance measurement • Indirect distance and height or partial height calculation (3-point Pythagoras functions) • Precise and rapid measurement of distances, areas and volumes • Integrated cross line laser (10 m range) • Integrated tape measure (5 m length) • Backlit multi-line display • Continuous measurement mode with MIN / MAX function • Addition and subtraction of measurement results • Automatic storage of the last 20 measured values • Robust workmanship for rough construction site use • Battery status indicator • Power-saving automatic switch-off Technical data Measuring range 0.05 - 40m resolution 1 mm Measurement accuracy - Laser ±0.2mm Ø Laser point at 10 mm distance Ø Laser point at 20 mm distance Ø Laser point at 30 mm distance 6mm 11mm 18mm Range 10m Laser class 2 Laser power < 1mW Retrieve last measurements 20 Dimensions H x W x D 85x82x56mm Weight 290g Ambient temperature min. 0°C - max. +40 °C Power supply 2 x 1.5V, AAA batteries (included) Trotec article no. 3,510,205,157 guarantee 2 years

    CHF 39.00

  • Trotec BD5A Kreuzlinien Laser - eShoppen GmbH Trotec BD5A Kreuzlinien Laser - eShoppen GmbH

    Trotec Trotec BD5A cross line laser

    Immediately after switching on, the battery-operated laser, which can therefore be used conveniently anywhere, projects a right-angled cross or, optionally, a single horizontal or vertical line onto the opposite object surface. And because the device is self-leveling, the projected lines in this mode are always 100% horizontal/vertical. The leveling mode automatically compensates for unevenness in the surface up to a 4° inclination. If self-leveling is not possible due to larger unevenness, the laser warns with a red flashing LED on the device and a pulsating laser cross on the projection surface. Where previously you had to laboriously use a spirit level and pencil, modern laser technology now helps. Despite the latest technology, it is so easy to use that not only experienced craftsmen can benefit from its practical advantages, but also DIY enthusiasts with less experience can create perfect right-angled as well as angle-independent laser guide lines. Thanks to its lightweight and compact design and the multifunctional holder included in the delivery, the device is extremely mobile. In addition to a ¼-inch thread for fixing it to standard tripods, it also has an integrated suction cup on the holder, which can be used to easily attach it to windows or smooth tiles, for example. Advantages at a glance • Projects bright laser lines over a distance of up to 10 m • Self-leveling laser (±4 °) – always automatically aligned straight • Laser projection selectable as cross lines and horizontal or vertical single lines • High accuracy of only ± 0.8 mm/m (at 0°) • Ideal for quick and straight alignment of drill holes, pictures, tiles, wallpaper strips, wall cabinets, shelves, etc. • Includes multifunctional combination mount with universal clamp plus suction cup • State-of-the-art laser technology with ultra-easy handling • Extremely light and ultra-compact • Battery operation means it can be used anywhere at any time • Laser locking function for projecting even diagonal lines • Operating switch with transport position for secure positioning of the laser when changing location • Integrated ¼-inch tripod mount Technical data Auto-Leveling Area ±4° Accuracy - Laser ±0.8mm/m (at 0°) Accuracy - Laser ±1 mm/m (at ?4 °) Range 10m Laser class 2 Laser power < 1mW wavelength 650nm Multifunctional LED Yes Dimensions H x W x D 72x60x83mm Weight 275g Buttons and slide switches Yes Housing plastic Protection class IP40 Power supply 2 x 1.5V AA batteries (included) Ambient temperature -20°C to +50°C Gimbal auto-leveling Yes Projection of cross and single lines Yes Laser locking function (transport protection) Yes Tripod thread yes, 1/4 inch tripod Multifunctional holder arm (included) Trotec article no. 3,510,205,151 guarantee 2 years

    CHF 39.00

  • Trotec BE20 Spannungsprüfer - eShoppen GmbH Trotec BE20 Spannungsprüfer - eShoppen GmbH

    Trotec Trotec BE20 voltage tester

    This two-pole tester is the ideal measuring device for electricians and ambitious DIY enthusiasts. Built and tested according to strict standards, equipped with many professional functions and, thanks to protection class IP64, also ideal for the rough everyday use. Voltage tests, optical and acoustic continuity tests, two-pole rotating field tests and single-pole tests for phase determination are possible. Despite its wide range of functions, the device is quick and easy to use. Its ergonomic design and low weight mean it fits comfortably in the hand and offers the user additional safety thanks to the switchable measuring point lighting for working in dark environments. Advantages for practice • Single-pole test for phase determination without counter potential • Versatile two-pole voltage tester for measuring direct or alternating voltage, polarity and rotating field • Optical and acoustic continuity testing • Voltage display even when batteries are empty • Automatic shutdown • Integrated flashlight for measuring point illumination • Optimal price-performance ratio • Automatic function test • Impact-resistant, dust-proof and splash-proof housing scope of delivery • Measuring device • Batteries • Operation manual Technical data Measuring circuit category CAT III 600V Measuring range 12-690 VDC and 12-400 VAC Measuring range continuity test < 300k DC and AC voltage automatic recognition Protection class IP64 Voltage display LED bar display Test type two-pole contact measurement Features • optical and acoustic passage indicator • Polarity test • Phase rotation indicator • Option for single-pole phase testing • automatic shutdown • integrated flashlight for measuring point illumination insulation Protection class II, double insulation Temperature range 0 °C to 50 °C Security EN61326, EN61010-1, EN61010-02-031 Battery type 2 x 1.5V, IEC LR03 Dimensions (L x W x H) 240x78x40mm Weight 237g Trotec article no. 3,510,205,230 guarantee 2 years

    CHF 39.00

  • Trotec PAC Rollladen-Fensterblende - eShoppen GmbH Trotec PAC Rollladen-Fensterblende - eShoppen GmbH

    Trotec Trotec PAC roller shutter window cover

    This extendable rail simplifies the attachment of the exhaust hose to windows with roller shutters and increases the cooling efficiency of mobile air conditioning systems. It is simply braced into the guide rails on the left and right and can be extended to a maximum width of 136 cm. The window cover harmonizes perfectly with white windows and allows the warm air to be discharged through the window in a way that is almost invisible from the outside. The exhaust hose must have a diameter of Ø15 cm; thinner or thicker hoses do not fit this system. The connection piece can be placed on the left or right side. Advantages at a glance Particularly simple and visually appealing attachment of the exhaust hose to the window The cooling efficiency of the air conditioning system is increased because less warm air from outside returns to the room Uncomplicated installation without a tradesman Put an end to exhaust hoses hanging out of the windows Variable adjustment for window widths from approx. 47 to 136 cm The following models from our range are compatible: • Argo: Argo Crono • Trotec: PAC series PAC 2100 X, PAC 2600 X, PAC 3000 X A+, PAC 3500 SH, PAC 3900 X For casement windows and hinged doors as well as tilt windows and tilt doors, please consider our "HotAirStopper" as a suitable solution. Trotec Article No. 6.100.000.039

    CHF 39.00

  • Sale -34% Trotec Stichsäge PJSS 13-230V - eShoppen GmbH Trotec Stichsäge PJSS 13-230V - eShoppen GmbH

    Trotec Trotec jigsaw PJSS 13-230V

    available soon   Shipping throughout Switzerland and Liechtenstein Delivery by courier Shipping from warehouse Switzerland Delivery within 1 to 2 working days

    It is not without reason that knob-grip jigsaws such as the PJSS 13-230V from Trotec are the undisputed favorites of the carpenters' guild. Due to the classic rod shape with knob handle and lower guide point, this jigsaw can be guided very precisely, especially in curves, because the hand can be placed low on the housing and close to the saw blade. The knob handle design of the PJSS 13-230V is particularly useful when sawing overhead or from below, as there is no annoying bracket to hinder you. The jigsaw insert underneath the workpiece also offers you the advantage of being able to achieve a completely tear-free surface on the top of the workpiece and at the same time have a good view of the cutting process. In addition, knob-grip jigsaws such as the PJSS 13-230V can be optimally operated with both hands, which not only enables particularly precise curved cuts, but also enables longer fatigue-free work sessions. But the PJSS 13-230V can also easily impress professionals with its inner values. As experts would expect, the stroke rate is not set at the touch of a button, but via a separate setting wheel, precisely and continuously from 0 to 3,000 min-1 to suit the material requirements. Once switched on, the powerful and smooth-running 850 W motor immediately releases all its power, which can be applied to the workpiece using a 4-way pendulum stroke to suit the material. With the PJSS 13-230V jigsaw, you can achieve cutting depths of up to 80 mm in wood, 12 mm in aluminum and 8 mm in metal. The keyless chuck on the PJSS 13-230V allows you to change the saw blade in just a few seconds without the need for tools. All saw blades with a single-notch shaft can be clamped in and high-quality saw blades for all areas of application are included in the scope of delivery so that you can get started straight away. You can open up even more application possibilities for your PJSS 13-230V in combination with our multi-part wood saw blade set or metal saw blade set – both of which are of course also available in the best Trotec quality. Laser-guided precision course In addition to optimal sawing performance thanks to a powerful and smooth-running motor with a variable, adjustable pendulum stroke, a good view of the workpiece is crucial for the quality of the saw cut. No problem with the PJSS 13-230V: The transparent chip guard with marking tip ensures precise, tear-free cuts during your sawing work. In addition, an integrated LED light and the practical blow-out function ensure a perfect, chip-free view of the cutting area of ​​the illuminated workpiece. In addition, the PJSS 13-230V is equipped with an innovative laser guide light that can be switched on separately. The laser projects a red line onto the workpiece and precisely indicates the cutting direction, making it easier to guide the saw freehand along a straight line. Deviations from the cutting line can be immediately detected and corrected. With an ideal center of gravity, the compact PJSS 13-230V has been ergonomically optimized for professional continuous use and the housing is also equipped with soft-grip inserts. This means that it is comfortable to hold even during long periods of use, ensures a secure hold at all times for low-vibration sawing work and can be guided precisely using its robust steel base plate. When making miter cuts, the saw shoe can be swiveled to both sides in 15° increments up to 45° without the need for tools and a plastic sliding shoe (supplied) can be attached to protect sensitive workpieces. The restart protection prevents the jigsaw from automatically switching on again, e.g. after a power failure, and thus offers an additional level of safety. Work faster without tools In contrast to many other jigsaws on the market, you do not need to carry any additional tools with you to use the PJss 13-230V. From changing the saw blade to adjusting the cutting angle, everything can be done with this jigsaw without any tools. This is by no means a given everywhere, but it is standard with the PJSS 13-230V! With the PJSS 13-230V you can make clean progress in any environment The PJss 13-230V is a clean solution for a wide range of jigsaw jobs - and not just in the workshop, garage or outdoors. Thanks to the integrated dust extraction, you can also easily use this pendulum-action jigsaw in your living room without creating a mess of sawdust after the work is done. Want to shorten the kitchen worktop or living room shelf quickly and easily on site? Simply set the blower function of the PJSS 13-230V to extraction mode and connect an external vacuum cleaner to the device. With the extraction function, you can keep both the room and the ambient air free of wood, plastic or metal shavings and chip dust - so you can saw comfortably in the living area too! Advantages for practice: Powerful 850 W motor with smooth running for low-vibration work 4-stage switch for optimal sawing progress: three pendulum stroke levels plus fine cutting level Switchable laser guide light for marking the cutting line Electronic stroke rate preselection for material-appropriate work Steel base plate with removable sliding shoe – can be swivelled to both sides up to 45° for mitre cuts without tools 2 blower functions: blowing out for chip-free cutting line and suction for dust-free work Keyless chuck for tool-free saw blade changes in seconds Chip protection for tear-free cuts Integrated LED work light Rubberized softgrip inserts in the knob handle housing for extra good grip

    available soon   Shipping throughout Switzerland and Liechtenstein Delivery by courier Shipping from warehouse Switzerland Delivery within 1 to 2 working days

    CHF 59.00CHF 39.00

  • Trotec Färbemittel PureRubin 200 g - eShoppen GmbH Trotec Färbemittel PureRubin 200 g - eShoppen GmbH

    Trotec Trotec dye PureRubin 200 g

    This color powder is easily visible without technical aids and is ideal for direct flow or connection control when detecting faulty or leaky connections and incorrect drainage systems. The high-yield marking dye can be mixed as a color solution in water as desired, depending on the desired color intensity, since the Pure powder mixtures are completely free of maximum dosage limits due to their extreme environmental compatibility. Further possible applications are in tracer hydrology, for example for flow path detection, for visualizing the mixing and discharge behavior in rivers, lakes, dams or water treatment plants as well as for controlling the flow and flow velocity in fish ladders. The Pure dye is also an ideal tool for simulated hazardous substance visualizations during fire department GSG exercises. Can be dosed as required for every need Due to their 100% natural, food-grade ingredients, the dyes in the Pure series can be dosed as desired - overdosing is not possible. Depending on the desired intensity, 2 g of Pure dye can be added per 1 to 5 liters of water, producing between 100 and 500 liters of dye solution with one Pure can. Advantages at a glance 100% natural, food grade hypoallergenic, vegan, kosher and halal 100% biodegradable Safe for humans and animals No impact on water quality No maximum dosage limits Water-soluble powder - easy to use composition Radish, apple, blackcurrant, citric acid and maltodextrin Technical data Dimensions (L x W x H) 70x70x165mm Contents 200 g ingredients Radish, apple and blackcurrant, citric acid and maltodextrin scope of delivery 1 can Trotec article no. 3.510.012.051

    CHF 42.00

Login

Forgot your password?

Don't have an account yet?
Create account